Wibromłoty
Vibratory pile hammers are used on sites during the construction of various hydraulic structures: wherever work is being done on sandy and clay soils and where it is necessary to strengthen coastal lines, foundations, and storm sewers. With the modern density of construction in urban areas, the vibratory pile hammer is an indispensable tool that allows to carry out work in close proximity to a residential and industrial housing development without the risk of damaging.
You can drive and also extract a variety of metal and polymer driving elements as follows: Larsen sheet piles, U- and Z-shaped bars, pipes of various diameters, reinforced concrete piles, and beams of all kinds of configurations with RESCHKE vibratory pile hammers. The possibility to equip vibratory pile hammers with various devices (for working with large diameter pipes, soil compaction etc.) is provided.
| RR300 | RR450 | |
|---|---|---|
 |
 |
|
| Static (eccentric) moment | 4 kg m | 6,9 kg m |
| Frequency | 2680 rpm | 2460 rpm |
| Centrifugal force | 310 kN | 453 kN |
| Amplitude | 12 mm | 13,7 mm |
| Working pressure in the fluid power system | 280-350 bar | 280-350 bar |
| Oil stream | 150-250 l/min | 195-350 l/min |
| Minimum power of hydraulic oil motor | 70 kW | 88 kW |
| Total weight of vibratory pile driver | 1050 kg | 1275 kg |
| Strength of driving / removal | 15500 kg | 15000 kg |
| Clamping force | 36 tons | 54 tons |
| Maximum weight of driving pile | 800 kg | 1000 kg |
| Excavator weight | 12-35 tons | 24-45 tons |
| A | 670 mm | 615 mm |
| B | 150 mm | 175 mm |
| C | 230 mm | |
| D | 1460 mm | 640 mm |
| E | 510 mm | |
| F | 890 mm | 945 mm |
| G | 1200 mm | 1250 mm |
| H | 25 mm | 32 mm |